Defrosting Tips For Your Fridge & Freezer

Are you thinking of defrosting method for your freezer or fridge? Then check this out.

Always switch off and unplug the freezer before cleaning or defrosting.

Load the contents of your freezer into large dustbin bags and cover the bags with a duvet or blanket. The food should stay frozen for several hours. But use a cool box for ice cream or soup which melt quickly.

After defrosting, wash fridges and freezers with a solution of two teaspoons of bicarbonate of soda to 1 litre (2 pints) of warm water-it removes lingering smells kenmore refrigerator repair los angeles.

Rub the inside of your freezer with glycerine, available from chemists, after it has defrosted. When you next have to defrost it, the ice will come away from the sides more easily.

Use a wet/dry vacuum cleaner to suck up any water left on the floor.

Defrosting fridge/freezers is much easier with a two-control model. That way, you can use the fridge to keep foodstuffs frozen while you deal with the freezer.

If you do not like defrosting, you can always pay more for a frost-free freezer which never needs it.

Replacing a worn seal

If your fridge door will not close properly, or the inside of the fridge seems warmer than it should be, the seal around the door may have gone. Check it by closing a thin strip of paper in the door. When the door is shut, the paper should be tightly gripped, and should not slide easily.

If you want to change the seal (also known as the gasket) yourself, buy a new one from a stockiest listed in the yellow Pages under ‘refrigerator repairs’. Check with the shop or the manufacturers how to replace it, or call in an engineer.

Is your fridge green enough?

One of the major causes of concern about the world ozone layer is the use of chlorofluorocarbon – chemicals that are used in a fridge insulation and cooling system. New technology has developed a non-chlorofluorocarbon coolant, but how do you get rid of an old fridge or freezer?

If you buy a new fridge or freezer from a major freezer centre, it will probably collect your old one free of charge and remove the chlorofluorocarbon safety before it recycled.

Sell your old fridge, do not scrap it. Or look out for notices in your area telling you who are recycling old fridges. Ask the local authority.

If you are buying a fridge/freezer, look into how energy efficient it is. Some use more electricity than others- the manufacturers will be able to tell you how much – so compare the different models.

Refrigeration Repair Or Replacement?

Often times, refrigeration repair is a real option, even though many homeowners may not realize it. No matter if you are working in a large commercial situation or you are trying to get your home’s fridge back up and working, it is often best to call in a professional to handle these types of problems for you. Doing so could actually help you to avoid replacing a device that may have many additional years of service available to you. Keep in mind, there are some situations in which replacement is best. How can you tell the difference?

Quotes and Consultations First

Before you ditch the device, call on a professional to find out if refrigeration repair is a real option. Generally, the individual will provide you with an inspection and a quote about the current condition of the device. This often means learning what the problem actually is and determining the cost of fixing it. Some problems are far more severe than others are kitchenaid refrigerator repair los angeles.

If the device needs refrigerant added, this is a simple fix that can take just a few minutes to get the system back up and running. On the other hand, if the device’s motor is no longer operational, that may mean you need to invest more money into the process of making repairs. However, it may still be a good investment to make, depending on the total cost to replace the device. Talk to the technician to determine what the best option for your situation is.

Consider Efficiency and Function Too

Aside from just worrying about the cost of making the repairs, talk to the professional about the efficiency of the current device. Is it really going to operate properly for you for years to come? Is it running less efficiently than it should be? Such inefficient devices can often be very costly to run. That means it may be best to replace them. Also, consider how well this device is working for you right now. Is it good enough? If so, then keeping it and repairing it may be the right step to take to solve the problem for good.

Talking to a professional about refrigeration repair instead of just going out to buy a new one can save you time and money in the long run. If you are worried that the device is not going to run well for you in the years to come, replace it. However, if it is under warranty, still running efficiently and the repairs are minimal, there is no benefit in tossing it out and getting a new one. Your technician can help you to make these decisions so you do not have to suffer any regrets down the road.

Troubleshooting 3 Common Dryer Repair Problems

Your dryer probably makes your life a whole lot easier. You don’t have to take your clothes down to the laundromat, which is going to save you time and money. However, when the appliances you rely on start to go haywire, you might find yourself incredibly inconvenienced. If you can catch these problems early, you can avoid falling into a trap.

1. Doesn’t Seem Hot Enough

If you’re using the same settings you’ve always used and drying times continue to increase, you’ve got a problem that is probably costing you money. Every second the dryer runs, you’re paying the power bill. Getting this taken care of quickly should save you money now and in the long run. There are two possible culprits dryer repair los angeles.

If you have a moisture sensor in your dryer, it is likely faulty. Moisture sensors are connected to the main circuit board and send electrical signals to your machine, telling it how moist your clothes are. If that is faulty, it could send incorrect signals. Your clothes might even be dry and the machine just keeps running because it doesn’t know that. In the short term, you could set your clothes on a timed cycle to see if they get dry, but you should definitely call a dryer repair specialist. If it is a problem with the circuit board, you don’t want it to get worse and more expensive.

The other culprit could be a malfunctioning thermostat. This device, much like the thermostat in your home, tells your appliance the temperature inside the drum. If that malfunctions, your machine might not heat up, thus your clothes aren’t getting dry. You can open the machine about halfway through the cycle to see if it’s hot. If it is hot, you probably have a faulty moisture sensor. If it’s not, you probably have a faulty thermostat. Either one could also indicate a bigger problem with your circuit board.

2. Seems Too Hot

An appliance that seems too hot usually means one of three things: either your vent is clogged, your thermostat is faulty, or your heating coil is malfunctioning. You need to address this issue immediately, because an overheating dryer is a serious fire hazard.

Locate the lint trap. Open it up. If it’s full of lint, that might be your problem. Clean it out and run your dryer again, while keeping a close eye on it. If it continues to heat up more than you’re comfortable with, turn it off and call a dryer repair specialist. You might have a thermostat or heating coil issue. Your best bet there is just to turn it off and not to use it until a professional inspects it.

3. Rocking or Knocking

This is the easiest one to diagnose. If you have heavy items like comforters in your machine, try to re-balance those to keep the drum from rocking. If it’s not imbalanced, you probably have a damaged drive belt that’s going to need a professional eye.

These are three of the most common issues. Sometimes they’re serious, and sometimes they’re not. Knowing the difference could be key to staying safe and saving money on your dryer repair costs.


Methods to Vet an Equipment Set up and Restore Firm Earlier than You Rent

Discovering dwelling equipment installers or restore execs who’re dependable, reliable, and certified can generally really feel like a frightening process. Study what components to think about while you’re procuring round as a way to discover the precise firm or equipment skilled for you.

When certainly one of your own home home equipment goes on the fritz, your every day life and routine are impacted. That is why it is important to get restore work or set up of a brand new equipment taken care of as quickly as potential. Nevertheless, except you have already got a relationship with a restore or set up agency, it may be extremely exhausting to know the place to start out by way of vetting completely different selections. Whether or not you want an oven restore or dishwasher set up, although, there are some important components that you must search for in any equipment firm. Learn on to seek out out some fundamental suggestions that can assist you to navigate the world of equipment execs as a way to make an knowledgeable determination earlier than you rent stove and oven repair altadena.

The very first thing that you have to try in terms of any kind of equipment professional is insurance coverage. Home equipment are complicated machines that usually deliver collectively water, electrical energy, and/or fuel into the identical house. Even when a washer restore, for instance, sounds pretty innocuous, engaged on an equipment like this (both by way of restore or set up) is inherently harmful. You don’t want to take the danger of being held responsible for any incidents that happen whereas a restore or set up professional is in your property, so search for firms which are absolutely insured.

You must also make sure that any firm you rent is licensed by the state. Because of this the state is aware of the person or firm in query is servicing home equipment. It additionally implies that the equipment professional has agreed to abide by state-determined requirements of acceptable practices, is responsible for penalties for unlawful practices, and is required to provide shoppers necessary data equivalent to service estimates. Earlier than you rent somebody for fridge, oven, or dishwasher restore or set up assist, you must ensure that they’re in compliance with all the required authorized parameters of your locality.

For those who discover a firm that’s each insured and licensed, you are most likely in fine condition, and you must really feel snug contacting them to seek out out in the event that they will help you together with your equipment restore or set up undertaking. Nevertheless, if you wish to be actually positive that your fridge restore or range set up goes to be dealt with with skilled integrity, you possibly can put potential firms to a 3rd take a look at: Are they established within the enterprise neighborhood? Many domestically owned firms will decide to bear accreditation from the Higher Enterprise Bureau. It is a nationwide group that promotes greatest enterprise practices, denounces substandard enterprise conduct, and serves as a watchdog for enterprise scams. Your area people may additionally have a enterprise affiliation of some kind with its personal membership standards and vetting practices. Both approach, an organization that willingly places its enterprise practices below public scrutiny will doubtless be a superb match for even probably the most explicit shoppers.

Routine Maintenance on Commercial Refrigeration a Requirement

You may be able to temporarily postpone scheduling the refrigeration contractor for routine residential refrigeration maintenance, but you can’t do that with commercial refrigeration. Not only is the equipment larger and more sophisticated than many home units, there are also health laws concerning commercial refrigeration that must be met at all times. When the health department shows up without warning to record the temperature of the food stored in the refrigeration unit, it had better be within established limits if you don’t want business operations interrupted.

Refrigeration Units Never Breakdown at the Right time

It seems like there is a universal law at work when it comes to essential equipment. The law is: Equipment will always breakdown when you can least afford it. At home the refrigerator will quit the same day you have 10 people coming over for dinner. Commercial refrigeration is sure to stop working during the dinner rush or on the busiest day of the year for your particular business refrigerator repair pasadena.

The refrigeration contractor in Dayton, OH often gets emergency calls from commercial businesses. A hotel or restaurant simply cannot operate for very long without refrigeration. Large businesses may have several walk-in refrigeration units and can temporarily transfer food to the working equipment.

Smaller businesses don’t have that luxury. What to do?

Know Your Refrigeration Contractor!

It’s important for a business to have a refrigeration contractor it works with on a regular basis. There are several reasons for this:

– Technician becomes thoroughly familiar with refrigeration units

– Repairs can often be completed much faster due to equipment familiarity

– Service technician will know where to order parts for the brand of equipment

There is no question that routine maintenance is the best defense against equipment breakdowns. Routine maintenance includes keeping the motors, coils and other parts free of dust, debris and normal kitchen residues including cooking oils and such found in commercial kitchens. The refrigeration contractor in Dayton, OH will also clean the compressor and check thermostats.

In fact, the contractor will insure that the units are maintained according to manufacturer specifications. Having a working relationship with the contractor will get you the most efficient service as quickly as possible if you do experience refrigeration problems. The contractor will be familiar with your equipment and able to get to work with a short learning curve.

Have a Backup Plan

Of course, it’s also important to have a backup plan in the event the refrigeration unit breaks down for an extended period of time. Losing a lot of food inventory can be expensive even when insured. That’s because your customers will remember the problems and some will fail to return. A backup plan includes knowing where you can send food for temporary storage if necessary.

A refrigeration contractor in Dayton, OH that performs routine maintenance on commercial refrigeration units is trained to perform routine and emergency repairs. Keeping your unit working is critical to your business. Don’t let the health inspector find a refrigeration unit that fails to meet state regulations for food temperature.

Maintaining Your Appliances

A majority of homes around the world use various appliances that make everyday chores easy to handle. For them to function well and last long, they do need to be maintained on a regular basis. Regular maintenance also ensures that they are safe to use in the long run. Most of these appliances are powered by electricity. It is then important to check for frayed wires as they can cause short circuits, give electric shocks and be a fire hazard.

Kitchen appliances:

Your kitchen will have appliances such as the refrigerator, the cooking range, the electric chimney, the oven, the egg beater, food processor, dish washer and waste disposal unit in the sink. They have to be kept clean on a regular basis. Make it a routine to clean dust and dirt off as soon as you finish using them kitchenaid stove and oven repair los angeles.

Food spills on the refrigerator shelves can cause staining and look very unseemly. Likewise, if the gasket of the fridge is not kept clean, it may stop functioning as it should.

Food particles and debris caught in the blades of the waste disposal unit reduces its efficacy. Washing it down with vinegar will remove the dirt and disinfect it too.

If you take the blades out of the food processor jars, you will find that food particles have caked around the threads of the stalk on which the blades fit. Bacteria can breed in these and cause food poisoning and stomach infections. Using vinegar to clean the jars out will also disinfect them.

The dishwasher may have food particles adhering to the shelves. Rub them down with a sponge dipped in vinegar.

The electric chimney will need to have the filter changed on a regular basis.. Check the recommended schedule in the accompanying manual and follow it accordingly for the chimney to be effective.

Cleaning appliances:

These would be appliances like the washing machine and the dryer.

Lint and dirt builds up in the washing machine and if not cleaned out regularly, will interfere with the efficiency of the machine. Clothes will emerge looking dirtier than before! Clean out the lint trap and replace any frayed and old inlet and outlet hoses.

The air conditioning unit:

To maintain the air conditioner, make sure you change the filters, especially before the onset of the summer and check the Freon levels in the cooling unit. This kind of maintenance will require the services of a professional. Not all of us are trained in the art of air conditioner maintenance!

Is Your Clothes Dryer Quietly Plotting To Kill You?

A rather startling question to pose considering that most of us, an estimated 8 out of 10 households, have a clothes dryer in our home and that they’re used on a regular, consistent basis without too much thought. What mighty fine pieces of modern marvel they are, too…those ole’ trusty clothes dryers! They certainly make life easier and they’re generally safe to operate. Let’s be honest, though…we take our clothes dryers for granted! We wash our clothes, toss em’ in the dryer, and expect that the end result will be an uneventful load of nice, dry, clean-smelling laundry. Indeed, that is the usual result. However, as with many of the relatively complex systems that comprise a home environment, there are some safety considerations to ponder and of which we need to maintain an awareness maytag dryer repair pasadena.

Again, clothes dryers are generally safe…as long as they’re properly installed, well vented, and receive periodic maintenance. Maintenance, you say? You mean like changing the oil in the family car? Well, yes…precisely that sort of routine maintenance albeit on, perhaps, a less frequent basis. The clothes dryer and its venting system need…no, require, periodic maintenance to keep you safe and to dry your clothes as efficiently and inexpensively as possible. Let’s examine those two concepts as they relate to clothes dryers…those of safety and of monetary efficiency.

As for the safety aspect, it’s really fairly simple. Your clothes dryer has the potential to catch fire and burn your house down. And, most unfortunately, a resulting house fire can kill you! Have I acquired your attention? Between 2004 and 2006, according to the National Fire Incident Reporting System (NFIRS), there were an estimated 15,600 related residential fires that required a fire department response. Those fires caused an estimated annual monetary loss of $99 Million, 400 injuries, and 15 fatalities. The leading cause of those fires was determined to be a failure to maintain the system. What causes these expensive, and sometimes deadly, clothes dryer related fires in the first place?

Clothes dryers do their job by forcing heated air through a rotating drum that contains your load of laundry. As the moisture is released, lint is created from the fibers of the content…clothing, towels, etc. Most of the lint is filtered by the clothes dryer filter…the one we are familiar with that’s usually located inside the door or on top of the unit; most of us are familiar with the need to clean that filter after every load of laundry. But some of that lint makes it past the filter and can collect in the ductwork between the clothes dryer and the exhaust hood (the discharge end of the duct that should…should, I say, be located be at the exterior of the building). The accumulation of lint inside the ductwork, or in an uncleaned filter, serves to create a restriction to the airflow and a concentration of lint which is a very combustible fuel source.

Can A Dishwasher Repair Be Covered By Insurance?

If water damage is noticeable near or around the area of the dishwasher, it may be necessary to file a claim with the homeowners insurance company for dishwasher repair. While many of these claims are substantiated, there may be times when the insurer is not willing to cover the damages. Here are some things that the insurance company may ask about:

Is the Appliance Old or Neglected?

If the appliance is older, it may be a little more difficult to get the repair costs covered by the insurer. They may say that it should have been replaced long before the leak occurred. The same goes for if the plumbing that leads to the appliance has been neglected. If the water line that leads to the back of the unit has not been maintained, any damages from water leaks may not be covered either. To keep this from happening, check the water lines often to ensure they are in good shape. If it begins to show its age by not getting dishes clean or not running properly, it may be necessary to either replace it or have it repaired by a technician. Be sure to keep any service receipts to show that it was repaired in the event they do not want to cover the damage whirlpool dishwasher repair los angeles.

Were Any Changes Made by a Contractor?

If there has been any recent kitchen remodeling done by a third-party contractor, including moving the unit, any damage caused by leaks may not be covered by insurance. When a manufacturer installs an appliance, it is often covered by a warranty. However, if it is moved or otherwise tampered with, that warranty could be voided. The same goes for many insurance companies. If the remodel included disconnecting the dishwasher and then the contractor didn’t reconnect it properly, the insurer may say that the contractor is at fault and should be responsible for any dishwasher repair.

Did the Leak Occur Suddenly?

If the appliance begins to leak suddenly, especially if it is a newer model, the insurance company may be more willing to cover any water damage. If it can be proven that the leak did not occur due to poor maintenance or there is no wear and tear on it, it will also likely be covered for any problems caused by the leak. If the leak has been present for a long period of time, however, the insurer may not be as willing to cover the dishwasher repair.

Water damage can be a difficult fix, so it is important that it is repaired as soon as possible. Extended water damage can lead to an increased need of dishwasher repair the longer it is present. If it is possible that the damage should be covered by the homeowners insurance, be sure to file a claim with the agent as soon as the problems become apparent.

Washer Maintain Tip

Correct Water Temperature.
Hot water is essential for washing heavily soiled clothes. The water should be delivered to the washer at 140 to 160F. Hot water releases deeply embedded dirt quickly by opening up the fibers, dissolves detergents rapidly, and helps sanitize clothes. Warm water is for washing more delicate fabrics and lightly soiled articles and for rinsing clothes. Warm water softens synthetic fibers less, prevents setting excess wrinkles, preserves special finishes, and protects nonfast colors. Cold water is used for washing very delicate or lightly soiled items. Cold rinse water helps to prevent excess wrinkles in wash-and-wear garments lg dryer repair pasadena.
2. Soft Water.
Hard water is the biggest reason for unsatisfactory washing results, by any washing method. The minerals in the water combine with soap and soil to form soap curd. This soap curd turns clothes gray, makes fabrics harsh and stiff, and causes fabrics to wear out sooner. Ideally, soft water should be used for both washing and rinsing, for the curdlike substance may form during either process. Water may be softened with a mechanical water softener, by adding a packaged water conditioner, or with a combination of the two.
3. Right Amount of Detergent.
Since there is such a wide variety of soil within a load of clothes and between loads, it is difficult to stat an exact amount of detergent to use. As a general rule, in the top-loading machine follow the detergent manufacturer’s recommendations for the amount of detergent; then adjust the amount according to needs. Remember the following points.
a. As the hardness of the water increases, the amount of detergent needs to be increased.
b. As the amount of soil increases, the amount of detergent needs to be increased.
c. As the size of the load increases, the amount of detergent needs to be increased.
d. Be sure to measure the detergent.
Preparation of the Washer Loads
Here are several important factors to remind you about the preparation of loads for your automatic washer appliance.
1. Check labels on garments for special instructions.
2. Sort clothes carefully by degree of soil, type of fabric, colorfastness, and special handling.
3. Mend rips and tears before washing.
4. Remove spots and stains. A stain-removal chart is usually found in the care and use booklet.
5. Pretreat heavily soiled areas such as collars and cuffs by brushing a concentrated detergent solution into the fabric with a soft-bristled brush, sponge, or fingertips. To make solution, dissolve granular detergent in water. Use the same detergent for pretreating and washing.
6. Remove shoulder pads and nonwashable or delicate trim.
7. Place very delicate or linty articles in mesh laundry bags.
8. Clean out all pockets, brush dirt from cuffs, close zippers, fasten hooks, ties, belts and apron strings into bow knots.
Loading the Washer
For best results, no more than two double bed sheets or two equally large articles should be used in a large load. The rest of the load can be made up of smaller items. Mixed loads of large and small pieces give the best washing action. Large, bulky items such as chenille spreads and blankets are best washed alone.
Conditioning Clothes
Washing Machines – Essentials for Good Washing
Conditioning is recommended for clothes which have become harsh or grey from soap or detergent that has not been completely rinsed from them. This is one of the most frequent washability complaints. It may be necessary to condition clothes several times before the old soap or detergent is completely removed. The suds that may be noticed are formed by the old soap or detergent that is being pulled from the clothes. Conditioning should be continued until suds do not form in the washer water. Here are some conditioning tips you should be reminded of .
1. Prepare clothes and load into the washer.
2. Add 1 or 2 cups nonprecipitating water conditioner- in addition to amount normally used to soften the water. Do not add detergent.
3. Set washer for a hot water wash and warm water rinse. If necessary, because of color or fabric, use warm water in washer.
4. Set washing machine water saver at appropriate level for load being conditioned.
5. Set control dial for max washing time.
6. Start washer. About halfway through washer phase, stop machine and check the amount of suds. If suds do not break down, there is soap or detergent buildup in the clothes.
7. Restart washer and allow it to finish the cycle. Repeat process until suds no longer appear to wash water.

Dryer Safety

The U.S. Consumer Product Safety Commission estimates that there are 15,000 clothes dryer fires per year. The result of these fires are material losses, injuries and even death. Fires can occur when lint builds up in the dryer or in the exhaust duct. Lint can block the flow of air, cause excessive heat build-up, and result in a fire in some dryers.

To help prevent fires follow these helpful tips:

· Clean the lint screen/filter before each load of clothes samsung dryer repair pasadena. It is so easy to forget to do this each time. A small reminder sign near or on the dryer itself is a good idea. Be aware of clothing that is still damp at the end of a typical drying cycle or drying requires longer times than normal, this may be a sign that the lint screen or the exhaust duct is blocked. Your high utility bill can be an additional signal.· Clean the dryer vent and exhaust duct periodically – A good rule of thumb is once a year.

Check the outside dryer vent while the dryer is operating to make sure exhaust air is escaping. If it is not, the vent or the exhaust duct may be blocked. Many times the damper is actually stuck. To remove a blockage in the exhaust path, it may be necessary to disconnect the exhaust duct from the dryer.

· Clean behind the dryer, where lint can build up. Also clean the interior of the dryer chassis to prevent lint build up. Always use a qualified service person to clean the dryer’s interior vent system.

· Replace plastic or foil, accordion-type ducting material with an approved fire resistant duct. Flexible plastic and foil type ducts are susceptible to kinks and can trap lint causing heat build up – A potential fire hazard! Most manufacturers specify the use of a rigid or corrugated semi-rigid metal duct, which provides maximum airflow.

· Take special care when drying clothes that have been soiled with volatile chemicals. Clothes that have come in contact with gasoline, cooking oils, cleaning products, or paint solvents can be combustible. If possible, wash the clothing several times to minimize the amount of volatile chemicals on the clothes and hang the clothes to dry. If using a dryer, use the lowest heat setting and a drying cycle that has a cool-down period at the end of the cycle. To prevent clothes from igniting after drying, do not leave the dried clothes in the dryer or piled in a laundry basket.